
Profile Design Sonic Ergo 52a aerolenksud | 400 mm
0/5 0 arvamust
Mudel:
RHSNC521
Tootja:
Profile Design
Hind:
174.00€
-
+
Salvestage
Lisa võrdlusse
| Laos | Tarnetähtaeg | |
| Kauplus | 2 | 2-5 tööpäeva |
Kas teil on selle toote kohta küsimusi? Küsi
17.40€ x 10 kuu.
Profile Design Sonic Ergo 52a aerolenksud | 400 mm

Sonic/Ergo 52A aerolenksud ühendavad eriti kerge disaini, suurepärase seadistusvõimaluse ja optimeeritud aerodünaamika, et iga rattur leiaks enda jaoks ideaalse tasakaalu kiiruse ja mugavuse vahel. Selle täiustatud lahenduse minimalistlik ja tõhus konstruktsioon vähendab frontaalpinda ja õhutakistust. Mugavus, lihtne reguleeritavus ja tipptasemel sooritus – kõik ühes aerodünaamilises paketis.
Põhiomadused:
- 52° pikenduse nurk: Võimaldab valida nii agressiivse „õlad tõstetud” asendi kui ka mugavama, vertikaalsema „pea püsti” asendi parema kontrolli ja mugavuse tagamiseks.
- Kuni 1500 seadistamisvõimalust:
- Küünarvarretugede sügavuse reguleerimine: -70 mm kuni -17,5 mm (7,5 mm sammuga)
- Küünarvarretugede laiuse reguleerimine: 124 mm kuni 290 mm (18,5 mm sammuga)
- Küünarvarretugede kõrguse reguleerimine: 60 mm kuni 130 mm (5 mm sammuga lisakõrgenduskomplektiga)
- Kiire ja lihtne seadistus: Pikenduste pikkust ja nurka saab reguleerida ühe poldiga kiirete muudatuste tegemiseks.
- Ergo käetugede süsteem: Ergonoomilised käetoed, mille asend on pööratav ja ümberkonfigureeritav, võimaldavad täpset seadistust või kerget üleminekut varasematelt seadistustelt.
- Kerged Sonic kronsteinid: Profile Designi kõige kergemad kronsteinid, mille lihtsustatud disain vähendab kaalu ilma tugevuse ja reguleeritavuse kompromissideta.
Tehnilised andmed:
- Bracket: Sonic
- Clamp Diameter: 31.8mm (26.0 w/Shims)
- Armrest: Ergo / 10mm Pads
- Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm)
- Armrest Offset: -70mm to -17.5mm in 7.5mm steps
- Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added)
- Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing
- Extension Length: 400mm
- Extension Angle: 52 Degrees
- Extension Rise: 87mm (bottom to top)
- Extension Offset: 15mm total
- Outer Diameter: 22.2mm
- Inner Diameter: 19.2mm
- Shifter Compatibility: Electronic or Mechanical
- Color: Anodized Matte Black
- Weight: 564g
All images displayed on our online store are intended to provide the most accurate information possible about the products we offer. However, it is important to note that these images are for informational purposes only and may differ from the actual appearance of the product.
Differences can arise for various reasons, including but not limited to, changes made by the manufacturer in the design, composition or colors of the products, as well as due to the settings of different monitors, which can change the color or appearance of the items.
Therefore, we encourage customers to consider this information before making a purchase decision, and if there are any questions regarding the specifications or appearance of a product, please do not hesitate to contact our customer service department for further information or clarification.
0 arvamust
0/5 Üldine hinnang
5
4
3
2
1
Selle toote kohta puuduvad kommentaarid.
Kokkusobivad tooted
Viimati vaadatud















